P M T

Real open space culture -
now new from PMT!

Our PMT TITAN free-standing mounting system will inspire you.

The naked truth? With PMT TITAN, you can transform unused open spaces into truly economical PV systems. Experience freedom, efficiency and innovation all in one!
Request now
Finally also for open spaces

Time for real open space culture

At PMT, real innovation counts - and that starts where others stop. With PMT TITAN, we present our first ground-mounted system. It enables the efficient use of unused residual areas, whether in industrial estates or rural regions, and transforms them into cost-effective PV systems. Because at PMT we know: What's underneath makes the difference!


We don't just lay it on thick ...

With PMT TITAN, there are no frills - just pure performance: shamelessly flexible, absolutely safe and blazingly fast. Together we will make your open space project a success!

Shamelessly flexible

Whether 1,700 or 2,500 mm module size, 10 to 20 degree inclination or alignment as an east-west or south-facing system - PMT TITAN adapts to your individual requirements. Thanks to innovative clamp connections instead of drilling, you can position many components flexibly and benefit from high pile-driving tolerances.

Safety first

With PMT TITAN you are on the safe side. Our free-standing mounting system impresses with its robust corrosion protection and continuous profiles. PMT TITAN has proven in the test center that it can withstand even extreme loads.

Blazingly fast

Standardized components and pre-assembled connecting elements eliminate the need for time-consuming cutting during assembly. Thanks to lightning-fast delivery and optimized logistics, your system will be up and running in no time at all.
Relax

Lean back instead of on it

PMT TITAN makes installation super easy - without any leaning from above. The modules are installed from below, so there are no microcracks and less climbing. This keeps the installation safe and user-friendly. Cheers!
On your marks, get set, go!

Solar engineers, it's time to take the next step!

Are you ready for Next Level Mounting?
Rely on state-of-the-art technology and customized concepts - together we will make your open space project a success!
Request now
Intuitive design for efficient installation

This is real open space culture

PMT TITAN impresses with its self-explanatory assembly. Telescopic purlins - consisting of inner and outer purlins - allow flexible adaptation to different table and module widths. Standardized components and simple connection mechanisms shorten assembly time, reduce storage costs and ensure safe, precise installation.
Ease of maintenance

Unrestricted access - for fast maintenance

The sophisticated design of PMT TITAN allows free access to all relevant components. This means that maintenance work can be carried out quickly and easily, reducing effort and costs and ensuring the long-term efficiency of the system.
Optimized planning thanks to PMT PLAN

Seamless integration for precise open space projects

The combination of PMT TITAN with PMT PLAN opens up considerable advantages in the planning and implementation of open-space projects. Thanks to seamless integration, planners and installers can precisely visualize and optimize the installation system as early as the design phase - for a smooth project flow.
Gentle hold thanks to nickel-strike coating

Precise clamping without material damage

The terminal screws from PMT TITAN have an innovative nickel-strike coating. This prevents the screws from "eating" into the material, ensuring a permanent, precise connection - for a reliable system and increased durability.
Optimum clamping range coverage

Flexible positioning for 1,700-2,500 mm modules

Thanks to the freely adjustable purlins, the clamp is always positioned in the ideal area of the modules. PMT TITAN covers all specified clamping areas - this makes module selection easier and offers more freedom when planning the ground-mounted system.
Infinitely adjustable module inclination

Flexibility for maximum energy yield

The length adjustment between the pile-driving post and rear leg allows the module inclination to be continuously adjusted from 10° to 20°. This increases system variability, covers more customer requirements and at the same time optimizes the energy yield of the system.
Versatile table variants with standardized components

More variants, less storage effort

Thanks to its clever design, PMT TITAN enables the assembly of different table variants - from endless and small tables to east-west or south-facing systems and up to 3-4 modules on top of each other - using the same components. This minimizes storage, simplifies site logistics and facilitates assembly.
6-point clamping with the same components

More flexibility thanks to adaptable design

PMT TITAN enables variable clamping variants by simply adding additional purlins and clamps - without any drilling. This means that a quarter-point clamping system can be transformed into a 6-point clamping system in no time at all, without the need for additional components.
Universally applicable

Optimum material thickness for all load zones

PMT TITAN impresses with its ideal material thickness, which functions reliably in a wide range of load zones. This means that the mounting system can be used universally and offers stable performance, even under demanding conditions.

Zack - done!

An intuitive installation process: from the precise insertion of the ram profiles to the final module fastening - self-explanatory and efficient.
This is real open space culture
Assembly instructions in 8 steps.
Step 1: Drive the C-profile ramming posts into the ground as specified.
Step 2: Screw on the C-profile extension.
Step 3: Screw the rafters together.
Step 4: Screw the diagonals together.
Step 5: Slide the inner/outer purlin apart and fix in place with purlin clamps.
Step 6: The purlins are mounted on the rafters using the cross clamp.
Step 7: The module center and module end clamps are distributed for mounting the modules.
Step 8: The PV modules are placed on top and fixed in place with the clamps.
Technical data
Components
System boundaries
System arrangement
South system, East-West system
Material
Ram posts: Steel coating ZM 310
Beam: Steel coating ZM 310
Purlins: Steel coating ZM 310
Clamps: Steel coating ZM 310
Screws: Hot-dip galvanized + stainless steel
Modules
Framed modules
Length: 1,700 - 2,500 mm
Width: 1,000 - 1,350 mm
Height: 25 - 35 mm
Module assignment
Single table (upright mounting):
3 - 4 modules on top of each other (5,100 - 7,800 mm total dimension, added module length + spaces between modules)
8 - 11 modules next to each other (8,000 - 11,400 mm total dimension, added module width + spaces between modules)

Endless mounting possible
Clamping variants
Quarter-point clamping
6-point clamping possible if several Purlins are used
Table tilt
10 - 20 degree table tilt, infinitely adjustable by adjusting the rear leg
Ramming depth
approx. 1.6 meters
Terrain

Slope of 10 degrees in direction 1

Slope of 10 degrees in direction 2

Statics

Individual system statics based on the local conditions

Start: Manual calculation

Later: Output of the structural analysis by the planning tool

Guarantee
15 years
Wind/snow load and terrain

Wind load zone 2

Snow load zone 2a

Terrain category 2 and higher

Ridge gap for east-west
10 - 40 cm
Row spacing east-west module to module
1 - 4 meters
Row spacing south module to module
1.8 - 7 meters
Gap between bottom edge of module and floor

80 - 120 cm,

depending on module size, table inclination and pile-driving depth

Construction near the coast
No restriction on construction near the coast
Cross clamp
Cross clamp
Module center terminal
Module center terminal
Universal 25 - 35 mm
Module end clamp
Module end clamp
Length: 22 - 25 mm, 25 - 30 mm, 30 - 35 mm
C-profile extension
C-profile extension
Length: 1,375 mm
Rafters
Rafters
Length: 6,000 mm, 6,700 mm
Diagonal
Diagonal
Length: 1,050 mm
Outer purlin
Outer purlin
Length: 3,310 mm, 6,000 mm
Inner purlin
Inner purlin
Length: 3,310 mm, 6,000 mm
Ramming post C-profile
Ramming post C-profile
Length: 2,500 mm, 3,000 mm, 4,000 mm
Purlin clamp
Purlin clamp
Hexagon head screw
Hexagon head screw
Thread x depth
M12 x 30
Collar nut
Collar nut
Thread: M12
Disk
Disk
Thread: M12
Standard table
Module length

3 or 4 modules on top of each other

1,700 - 1,850 mm = 4 modules on top of each other

1,850 - 2,560 mm = 3 modules on top of each other

Possible total length = 5,100 - 7,800 mm

3 or 4 modules on top of each other 1,700 - 1,850 mm = 4 modules on top of each other 1,850 - 2,560 mm = 3 modules on top of each other Possible total length = 5,100 mm - 7,800 mm

7 - 11 modules next to each other

1,000 - 1,350 mm

Possible total width = 6,200 - 11,600 mm

Small table
Module length

3 or 4 modules on top of each other

1,700 - 1,850 mm = 4 modules on top of each other

1,850 - 2,560 mm = 3 modules on top of each other

Possible total length = 5,100 - 7,800 mm

Small table
Module width

3 - 6 modules next to each other

1,000 - 1,350 mm

Possible total width = 3,390 - 6,200 mm

Safety brought to the surface

Because what's underneath is important

With PMT TITAN, everything runs smoothly - from initial planning to final installation. Thanks to standardized components, simple installation from below and integration into PMT PLAN , our free-standing installation system always cuts a fine figure. So you can sit back, relax and lead your project to success without any worries.
Safer mounting
PMT BEYOND

EVERYTHING FOR YOUR PROJECT - AND BEYOND.

With PMT BEYOND, you get an all-round service: Individual advice, precise planning, fast additional parts service and dedicated support - everything to ensure that your project is optimally looked after.


Quotes

"With PMT TITAN, we have realized our first open-space assembly system - a real milestone for PMT. PMT TITAN stands for our innovative spirit and sets new standards in assembly efficiency."

Jörg Weber-Schorsch

Simply good
Advice

Arrange a personal consultation today and let's talk about your project – free of charge and without obligation.

Contact us

YOUR CONTACT PERSON
Dr. Annkathrin Thalenhorst
Sales Director
+ 49 (0) 9225 95500 project@pmt.solutions Contact us now
Partner
Back to top