P M T

Photovoltaic flat roof mounting system east-west

PMT EVO 2.1 EW - Simple. Flexible. Safe.

As a photovoltaic mounting system, PMT EVO 2.1 EW is the ideal solution for flat roofs with an east-west substructure for the modules. With PMT EVO 2.1 , PMT focuses on safety and quality as well as short installation times and cost efficiency.
Request now

LET US CONVINCE YOU

Quick and safe installation

We continue to rely on our tried-and-tested click technology, enabling fast and error-free installation.

The whole package makes the difference

The east-west mounting system is suitable for all framed modules on the market, has a lightning current carrying capacity and a low-resistance connection.

General building authority approval

Image

PRODUCT FEATURES

Innovative click connections, smart cable routing and variable module dimensions make the installation of PMT EVO 2.1 EW uncompromisingly simple. Discover the many other advantages of our east-west substructure.

Simplified installation, certified safety and top quality performance for your flat roof projects

The east-west mounting system is suitable for almost all roof surfaces with a pitch between 0 and 10° and can be used in almost all European wind and snow load zones. There is also a 10° and a 15° variant.

Thanks to the innovative click connections of the PV mounting system Flat Roof East-West, the system can be installed safely and in a few simple steps.

We were one of the first companies to receive general technical approval from the German Institute for Building Technology for our aerodynamic flat roof systems. This certification confirms our technical and quality standards.
The east-west mounting system is suitable for almost all roof surfaces with a pitch between 0 and 10° and can be used in almost all European wind and snow load zones. There is also a 10° and a 15° variant.

Thanks to the innovative click connections of the PV mounting system Flat Roof East-West, the system can be installed safely and in a few simple steps.

We were one of the first companies to receive general technical approval from the German Institute for Building Technology for our aerodynamic flat roof systems. This certification confirms our technical and quality standards.
read more
Revolutionary design through evolution
Click technology

Safe and simple technology

The flat roof east-west PV mounting system is easy to install thanks to click connections that cannot be reversed. The new ProPlates are also mounted on the profiles with a simple click.
Tested and safe

Lightning current carrying capacity

Our flat roof systems are inherently capable of carrying lightning currents and can therefore be integrated into the building's lightning protection concept. The lightning current carrying capacity of the east-west substructure has been verified in accordance with DIN EN 62561-1 (VDE 0185-561-1) : 2017-12.
PMT Quality

Safety first

We regularly test and verify our PV east-west substructure as part of wind tunnel tests, experimental component tests and on the basis of current DIN standards. Additional optional components such as ridge couplings and Solmont connections increase the safety factor.
Module independence

Variable dimensions possible

In principle, our photovoltaic fasteners are suitable for all standard modules on the market. PMT EVO 2.1 covers module surfaces up to 2.4 square meters.
Ballasting

Standardized ballast blocks

Thanks to the standardized ballast stones, our east-west substructure can be planned and installed quickly and easily. The 15 kg stones are already integrated into PMT-Plan . Our mounting systems also have a significantly lower ballast requirement compared to other substructures.
Perfect support

Adapts to the surface

The continuous PMT EVO 2.1 floor profiles are supplemented by the new ProPlates. These offer an improved contact surface and thus provide relief for various roof substrates.
Simple cable routing

Invisible integration in the system

Thanks to the integrated cover of the east-west substructure, the individual cables are no longer visible. The system includes a triple edge clip holder for fixing. Depending on the requirements of the system, separation distances of more than 150 mm can be maintained. The cables can be laid separately according to DC +/-.
Universal module and ballast clamp

Aiming high

Regardless of which modules are used with the PMT East-West substructure, our universal fastening covers clamping ranges between 30 and 50 mm.
Accessories from PMT

The optimal supplement

Depending on your requirements, we can offer our tried-and-tested accessories for our east-west substructure. Whether ridge coupling lengthwise and crosswise, route connection, mechanical fastening points, side covers or trapezoidal sheet metal adapters - we have the right extra to suit the requirements of your project.
Gallery

PMT EVO 2.0 EW for MARK Metallwarenfabrik in Austria

MARK Metallwarenfabrik's own electricity and high energy and CO2 savings: 1,500 solar modules will capture the sun's rays against the backdrop of the Austrian Alps in future.
View reference

PMT EVO 2.0 EW for BAUHAUS in Haßloch

The new 2,000 m² system with our flat roof substructure makes an important contribution to the outstanding energy efficiency project, which was awarded the "EHI Energy Management Award 2020".
View reference
Technical data
Components
Accessories
Type of application
Flat roof up to 5° roof pitch
(special projects up to 10° possible)
Angle of attack
10° and 15°
Alignment
East-west substructure
Roof covering

Foil (EPDM, PVC, TPO/FPO), bitumen, sheet metal, concrete

ProPlate Gravel: Gravel + green roof

Standard step size
from 2205 mm to 2882 mm (depending on module width and system variant)
Weight
System surface load incl. module and ballast from 9.5 kg/m²
Plastic plate
Plastic plate made of PE-HD (high-density polyethylene), no plasticizer migration
Approvals
blitzstromtragfähiges Ost-West-Montagesystem nach DIN EN 62561-1 (VDE 0185-561-1) : 2017-12

allgemeine bauaufsichtliche Zulassung Z-14.4-790 für das Gesamtsystem

niederohmiger Verbindungsnachweis (<1 Ω) für das Gesamtsystem
Material

Aluminum EN-AW-6063-T3
Stainless steel A2-70
High-density polyethylene PE-HD

PV module suitability
All standard PV module sizes:
Width: 985-1300 mm,
Length: 1550-2400 mm,
Height: 30-50mm,
(special sizes available on request)
Main floor profile
Main floor profile
EVO 2.1 HBP type 2043
EVO 2.1 HBP type 2180
EVO 2.1 HBP type 2280
EVO 2.1 HBP type 2380
EVO 2.1 HBP type 2480
Plastic plate
ProPlate
ProPlate
Base
Base
10° Components:
EVO B10 type 75
EVO B10 M6 type 75

15° Component:
EVO B15 type 75
EVO B15 M6 type 75
Cross brace
Cross brace
EVO QBS
Lengths: from 1568 to 2393 mm
Cross brace connector
Cross brace connector
EVO QSV type 390
EVO QSVU type 1180
Tower
Tower
10° component: EVO T10 type 75
15° component: EVO T15 type 75
Connecting floor profile
Connecting floor profile
EVO V1BP type 127
EVO V2BP type 267
EVO 2.1 V3BP type 367
EVO 2.1 V4BP type 567
Start and end floor profile
Start and end floor profile
EVO 2.1 AEBP Type 61
Distance gauge
Distance gauge
EVO AL univ.
Screw
Screw
M8x30
Center clamp
Center clamp
MK type 40
End clamp
End clamp
EK Type 35
Mounting template
Mounting template
EVO 2.1 Click Guide HBP 2043
EVO 2.1 Click Guide HBP 2180
EVO 2.1 Click Guide HBP 2280
EVO 2.1 Click Guide HBP 2380
EVO 2.1 Click Guide HBP 2480
Cross and ballast strut mounting adapter
Cross and ballast strut mounting adapter
EVO MAQBS Type 75
Center support
Center support
10° component: EVO MAG EW10
15° component: EVO MAG EW15
Side cover
Side cover
10° Components:
EVO SDR EW10
EVO SDL EW10

15° Components:
EVO SDR EW15
EVO SDL EW15
Cable duct cover
Cable duct cover
EVO 2.1 KD type 160
EVO 2.1 KD type 280
EVO 2.1 KD type 400
EVO 2.1 KD type 600
Ground profile route connection
Ground profile route connection
EVO 2.1 TRA T type 400
EVO 2.1 TRA T type 700
EVO 2.1 TRA T type 1000
EVO 2.1 TRA B type 400
EVO 2.1 TRA B type 700
EVO 2.1 TRA B type 1000
EVO 2.1 TRA type 195
EVO 2.1 TRA type 400
ProPlate Gravel
ProPlate Gravel
Ridge connector
Ridge connector
EVO 2.1 FV Type 547
USO
USO
10° component: EVO USO EW10 type 100
15° component: EVO USO EW15 type 100
Solmont mounting foot
Solmont mounting foot
Available with different coatings adapted to the roofing membrane
Route connection
Route connection
EVO TRQBS L type 150
EVO TRQBS R type 150
Ballast tray
Ballast tray
EVO 2.1 BW V01 type 70
EVO 2.1 BW V01 type 70 - split tray
EVO 2.1 BW V02 type 70
EVO 2.1 BW V02 type 70 - split tray
Bracket for irradiation sensor
Bracket for irradiation sensor
10° Components:
EVO TES L Type 10°
EVO TES R Type 10°

15° Components:
EVO TES L Type 15°
EVO TES R Type 15°
Trapezoidal sheet metal adapter
Trapezoidal sheet metal adapter
EVO TBH Type 208
Screw
Screw
M8 x 16
To the service

ARE YOU PLANNING A PROJECT?
WE WILL BE HAPPY TO ADVISE YOU

YOUR CONTACT PERSON
Stefanie Weickert
Head of Internal Sales
+ 49 (0) 9225 95500 project@pmt.solutions Contact us now
Partner
Icon

FAQ

Frequently asked questions

How many different types of cladding will there be?

There are three different cladding variants per main floor profile - standard, partial surface and full surface.

How much larger is the contact surface of the ProPlates?

The contact surface of the EVO 2.1 main floor profiles with ProPlates is on average 40% larger than that of the EVO 2.0 main floor profiles.

How much better will the load transfer into the roof be (in percent)?

The contact surface of the ProPlate of the EVO 2.1 system is on average approx. 40% larger than that of the high-tech building protection mats of the EVO 2.0 system. This is an average value, taking into account all rail lengths and all bonding variants.

What about the coefficient of static friction, also on bitumen?

We recommend measuring the static friction coefficient for each project on a project-specific basis using the PMT measurement protocol and the PMT static friction coefficient backpack.

The default value in the planning tool PMT PLAN is 0.5, which must be verified on a project-specific basis.

Are there migration results? Are film manufacturers involved?

The ProPlate plastic plate has been tested on various roof sealants (PVC, bitumen, EPDM, FPO/TPO).

You can request more detailed information at any time from your contact person or via project@pmt.solutions.

How much does the EVO 2.1 cost?

You can find the system prices in the corresponding price list. If you do not have this, you can request it at any time from your direct contact or project@pmt.solutions.

Can 2.1 be installed with 2.0 in a project?

PMT does not recommend mixing the different system variants EVO 2.0 and EVO 2.1 .

Can the 2.1 rail for trapezoidal sheet metal be used with the TBSH?

Installation for trapezoidal sheet metal with the TBSH can be carried out as usual.

Can Multi Monti continue to be offered?

The Multi Monti system (fastening the main floor profiles to the ballast blocks using Multi Monti screws) can be installed as usual. This is a takeover article.

What solution do we offer on trapezoidal sheet metal against the bead?

Installation for trapezoidal sheet metal with the TBH type 208 can be carried out as usual - both the main floor profile and the TBH type 208 are transfer components that can be installed as usual.

What heat and cold resistance does the ProPlate have?

The ProPlates have been tested and approved for temperatures between -20°C and +80°C.

Is a connection from 1° still recommended?

Furthermore, we recommend a connection to the roof from a roof pitch of 1° due to the thermally induced caterpillar effect. For this we recommend the BSW information paper, which we are happy to provide on request.

What is the material resistance of the plastic plates?

For this purpose, endurance friction tests were carried out for a service life of 25 years. In addition, UV tests were carried out to ensure appropriate durability. If you require more detailed information on this, you can request it from your direct contact person or via project@pmt.solutions.

Is there a chemical and mechanical approval for bitumen roofing?

The ProPlate plastic plate has been tested on various roof sealants (PVC, bitumen, EPDM, FPO/TPO).

More detailed information can be requested at any time from your contact person or via project@pmt.solutions.

What material is the ProPlate made of?

PE-HD (high density polyethylene)

What are the warranty conditions?

The warranty conditions are available under Downloads.

Can I plan the system in the tool?

EVO 2.1 can be planned in the same way as EVO 2.0 via PMT PLAN . If you have any detailed questions about this, you can contact us at any time at project@pmt.solutions.

How do I know where the ProPlates are going?

The ProPlates can be found in the planning documents. There are three different options for using ProPlates for each main floor profile: Standard, partial surface or full surface.

The exact placement of the ProPlates can be found in the corresponding data sheet. Our installation template - Click Guide, which can be adapted to the corresponding cladding variant, is a further aid for correct cladding on the roof.

to PMT Plan

Is a connection from 1° still recommended?

We would also like to draw your attention to the BSW information paper from the specialist construction group, which we will be happy to send you if required. Based on this information paper, we have decided to give a general recommendation for a connection from a roof pitch of 1.0°. With the introduction of the new expansion stage of the PMT EVO 2.1 system with ProPlates and their mechanical attachment to the main floor profiles, we are extending the recommendation for a connection to the flat roof from a slope of approx. 2% (roof pitch approx. 1.15°), provided that the PMT checklist has been completed accordingly and taken into account when planning the system. As each roof requires individual consideration due to unknown, individual parameters, we recommend appropriate maintenance routines. We can provide you with more detailed information on this.

Back to top