The best technology for the green roofs of tomorrow.
PMT EVO GREEN - Greened. Proven. Future-proof
PMT EVO GREEN is an innovative PV mounting system based on the tried-and-tested PMT EVO 2.1, which was specially developed for use on green flat roofs. It combines regenerative power generation with ecological roof utilization and thus meets the highest requirements for sustainability, cost-effectiveness and urban building culture.
Request now Scroll
EVO GREEN
Gallery
CONVINCINGLY GREEN - WITH A SYSTEM
Proven technology, rethought
Even with green roofs, our click-connection technology ensures quick, secure and roof-penetration-free installation - without compromising on efficiency.
System solution with added value
PMT EVO GREEN is suitable for all commercially available framed PV modules and can be integrated efficiently and safely thanks to its sophisticated system architecture - ideal for green flat roofs with the highest demands on functionality and flexibility.
General building authority approval has been applied for.
The magic triangle - WITH PMT EVO GREEN NO MORE IDEAL, BUT REALITY.
In system development for photovoltaics on flat roofs, the following has long been true: fast, good or cheap - two of these properties can be achieved, but rarely all three at the same time. PMT EVO GREEN resolves this apparent paradox. As a PV mounting system specially developed for green roofs, PMT EVO GREEN achieves the rare balance of system quality, mounting efficiency and economic scalability - and thus fully represents the much-cited "magic triangle".
Learn more
Good - Technically sophisticated & reliable in the long term
PMT EVO GREEN is based on a proven, aerodynamically optimized system platform, supplemented by features for green roof applications. High-quality system components, integrated cable routing and coordinated load distribution ensure a high degree of safety and stability. The general building authority approval has already been applied for. We will be happy to provide you with confirmation of receipt.
Fast - easy to plan and install
The system architecture is consistently designed for efficiency: Sophisticated click connections, pre-assembled components and flexible module row spacing enable rapid and low-coordination implementation. The reduced planning effort, for example through integrated maintenance aisles or module diversity, also contributes to quick implementation - especially for larger areas or tight construction time frames.
Affordable - Economical over the entire life cycle
The system not only offers cost benefits through fast installation, but also in operation. The modular structure enables flexible project sizes. The result: a PV system with an attractive cost-benefit ratio.
More than assembly: green efficiency meets technical precision
PMT EVO GREEN is far more than just a mounting system - it is a contribution to sustainable urban development. Whether retention roof, biodiversity solution or extensive greening: the system is compatible with a wide range of green roof types and thus supports ecological and economic goals.
The tool-free click connection enables quick, secure installation - without any roof penetration and with minimal static load.
Tested and approved: The general building authority approval is commissioned and provides maximum planning and legal certainty for investors and planners.
The tool-free click connection enables quick, secure installation - without any roof penetration and with minimal static load.
Tested and approved: The general building authority approval is commissioned and provides maximum planning and legal certainty for investors and planners.
PMT EVO GREEN is far more than just a mounting system - it is a contribution to sustainable urban development. Whether retention roof, biodiversity solution or extensive greening: the system is compatible with a wide range of green roof types and thus supports ecological and economic goals.
The tool-free click connection enables quick, secure installation - without any roof penetration and with minimal static load.
Tested and approved: The general building authority approval is commissioned and provides maximum planning and legal certainty for investors and planners.
The tool-free click connection enables quick, secure installation - without any roof penetration and with minimal static load.
Tested and approved: The general building authority approval is commissioned and provides maximum planning and legal certainty for investors and planners.
read more
Type of application
Green roof up to 3° roof pitch
(with on-site connection up to 10° possible)
Maximum unevenness of the green roof must not exceed +/- 3 cm over the length of 2 modules
(with on-site connection up to 10° possible)
Maximum unevenness of the green roof must not exceed +/- 3 cm over the length of 2 modules
Alignment
East-West
Standard step size
from 2,370mm to 3,280mm Landscape (depending on module width and system variant)
from 3,980mm to 5,070mm Portrait (depending on module width and system variant)
from 3,980mm to 5,070mm Portrait (depending on module width and system variant)
Plastic plate
Plastic plate made of PE-HD (high-density polyethylene), no plasticizer migration
Material
Aluminum EN-AW-6063-T3
Stainless steel A2-70
High-density polyethylene PE-HD
Angle of attack
10°
Roof covering
Foil (EPDM, PVC, TPO/FPO), bitumen, sheet metal, concrete
ProPlate Gravel: Gravel + green roof
Approvals
abZ beantragt
Blitzstromtragfähiges Montagesystem nach DIN EN 62561-1(VDE 0185-561-1):2017-12
niederohmiger Verbungsnachweis (<1 Ω) nach DIN VDE 0100-540, DIN VDE 0100-712 für das Gesamtsystem
Blitzstromtragfähiges Montagesystem nach DIN EN 62561-1(VDE 0185-561-1):2017-12
niederohmiger Verbungsnachweis (<1 Ω) nach DIN VDE 0100-540, DIN VDE 0100-712 für das Gesamtsystem
PV module suitability
All standard PV module sizes:
width: 985-1305 mm,
length: 1550-2407 mm,
height: 25-50mm*
*new module clamps type 50 for frame heights of 25-40mm
width: 985-1305 mm,
length: 1550-2407 mm,
height: 25-50mm*
*new module clamps type 50 for frame heights of 25-40mm
ARE YOU PLANNING A PROJECT?
WE WILL BE HAPPY TO ADVISE YOU
YOUR CONTACT PERSON
Stefanie Weickert
Head of Internal Sales
+ 49 (0) 9225 95500 project@pmt.solutions Contact us now 
FAQ
Frequently asked questions
How much does the system cost in €/kWp or €/module?
Send us your project. You will then receive an individual offer with the corresponding price.
How long is the warranty and what is included?
The product warranty is 15 years incl. ProPlate or ProPlate Gravel.
Can the system be integrated into the lightning protection system?
PMT EVO GREEN has been tested for lightning current carrying capacity and can be integrated into the lightning protection concept of the building by a lightning protection engineer. Please note that one lightning protection screw must be installed for each connectionPMT EVO GREEN Base or PMT EVO GREEN Tower to HBP, VBP or AEBP).
Can the equipotential bonding be compared with the PMT EVO 2.1 system?
The low-resistance connection test was carried out by an external testing institute. The module earthing can be covered by our TerraGrif or by the module clamps including earthing plate.
Is the abZ already available?
The abZ has already been submitted to the DIBt. We can provide you with the confirmation of receipt. Please contact us if required.
What needs to be considered with a green roof?
In general, the greening (extensive or intensive) and the appropriate ground gap and maintenance aisle must be taken into account. Please inform us of any relevant specifications so that this can be taken into account during planning.
It should also be noted that PV systems on green roofs are not maintenance-free. The maintenance instructions must be observed.
Further specifications (regional, building owner, insurance, fire protection and other adjacent trades) must be observed and communicated to PMT as planning specifications.
It should also be noted that PV systems on green roofs are not maintenance-free. The maintenance instructions must be observed.
Further specifications (regional, building owner, insurance, fire protection and other adjacent trades) must be observed and communicated to PMT as planning specifications.
What are the advantages of ballasting compared to an integrated green roof system?
A ballasted system can also be retrofitted to existing green roofs. However, the corresponding load reserves must be taken into account. Furthermore, it is much easier to repower a ballasted system if individual components need to be replaced or the substructure moved due to a different module size. In addition, there is a clear separation of the different trades, whereby the expertise of each individual can be used accordingly.
Note on possible eligibility
The PMT EVO GREEN product may in principle be eligible for funding under state or regional funding programs in the areas of sustainability and energy efficiency. However, the specific requirements, application channels and funding amounts vary considerably - depending on the federal state, available programs and the individual circumstances and objectives of the applicant (e.g. company size, industry or type of project).
We ask for your understanding that we cannot offer advice on funding matters and therefore recommend that you obtain information yourself from the relevant authorities or an independent funding consultant.
We ask for your understanding that we cannot offer advice on funding matters and therefore recommend that you obtain information yourself from the relevant authorities or an independent funding consultant.