Photovoltaic flat roof mounting system
PMT X118 - Protection without limits
The assembly system that guarantees stability, efficiency and
guaranteed. PMT X118, the assembly system that defies every challenge.
defies every challenge. Our innovative flat roof system revolutionizes
revolutionized by incomparable stability, efficiency in assembly
and unsurpassed cost-effectiveness. Our promise:
Your project will be successful - guaranteed.
request now
Scroll
PMT X118
LET US CONVINCE YOU
Simple assembly
The system enables simple and
and quick installation of the system.
Thanks to the innovative Push & Click
technology, future maintenance
maintenance work can be carried out quickly and
carried out quickly and easily.
Reliable throughout
The low acquisition costs,
the increase in electrification
and the extensive
and extensive warranty services enable
unsurpassed economic efficiency.
Unbeatable overall economy
PMT X118 is particularly suitable for
large modules. This allows
large projects even faster and
more efficiently.
Simple installation and top quality performance for your flat roof projects
PMT X118 is suitable for roof surfaces with a pitch between 0 and 10° and can be used in almost all European wind and snow load zones.
During the planning process, unused roof areas and disturbed areas are efficiently converted with PMT X118. The result is an optimized use of space, which in turn leads to increased energy production in relation to the existing roof area. As an additional benefit, we offer a 15-year guarantee for PMT X118, which also includes the EasyPlates.
During the planning process, unused roof areas and disturbed areas are efficiently converted with PMT X118. The result is an optimized use of space, which in turn leads to increased energy production in relation to the existing roof area. As an additional benefit, we offer a 15-year guarantee for PMT X118, which also includes the EasyPlates.
PMT X118 is suitable for roof surfaces with a pitch between 0 and 10° and can be used in almost all European wind and snow load zones.
During the planning process, unused roof areas and disturbed areas are efficiently converted with PMT X118. The result is an optimized use of space, which in turn leads to increased energy production in relation to the existing roof area. As an additional benefit, we offer a 15-year guarantee for PMT X118, which also includes the EasyPlates.
During the planning process, unused roof areas and disturbed areas are efficiently converted with PMT X118. The result is an optimized use of space, which in turn leads to increased energy production in relation to the existing roof area. As an additional benefit, we offer a 15-year guarantee for PMT X118, which also includes the EasyPlates.
read more
Gallery
Type of application
Flat roof up to 10° roof pitch
Angle of attack
10°
Alignment
East-West
Roof covering
Foil (EPDM, PVC, TPO/FPO), bitumen, concrete
Standard step size
2384 mm / 2504 mm / 2629 mm / 2749 mm
Weight
System surface load incl. module and ballast from 12.5 kg/m²
EasyPlates
Plastic plate made of PE-HD recyclate (high-density polyethylene)
No plasticizer migration
Material
Sheet steel S350GD / S550GD, coating ZM310
PE-HD recyclate
PV module suitability
All standard module sizes
Edge clamping
Length = 1,600 - 2,000 mm,
Width = 990 - 1,230 mm,
height = 30 - 40 mm
Quarter-point clamping
Length = 1,600 - 2,500 mm,
Width = 990 - 1,230 mm,
height = 30 - 40 mm
ARE YOU PLANNING A PROJECT?
WE WILL BE HAPPY TO ADVISE YOU
YOUR CONTACT PERSON
Stefanie Weickert
Head of Internal Sales
+ 49 (0) 9225 95500
project@pmt.solutions
contact now
FAQ
Frequently asked questions
What about the adhesive friction value, also on bitumen?
We recommend measuring the static friction coefficient for each project on a project-specific basis using the PMT measurement protocol and the PMT static friction coefficient backpack. The default value in the planning tool PMT PLAN is 0.5, which must be verified on a project-specific basis.
What heat and cold resistance do the plastic plates have?
The plastic disks for PMT X118 should be tested and approved for the same temperature resistance as the EVO 2.1. This means for temperatures between -20ºC and +80ºC.
Are there migration results for the plastic plates? Are film manufacturers involved?
As with the EVO 2.1, the plastic plate of the PMT X118 system is to be tested on various roof sealants (PVC, bitumen, EPDM, FPO/TPO).
Is a connection from 1° still recommended?
Furthermore, we recommend a connection to the roof from a roof pitch of 1º due to the thermally induced caterpillar effect. For this we recommend the BSW information paper, which we can provide on request.
What is the material resistance of the plastic plates?
For this purpose, long-term abrasion tests are carried out for a service life of 25 years. In addition, UV tests are carried out to ensure appropriate durability.
How do I know where the plastic plates go?
The exact positioning can be found in the corresponding data sheets for the various floor rails.
Can I plan the system in the tool?
When the PMT X118 flat roof mounting system goes on sale, it will be possible to plan the system using our planning software PMT PLAN .
What are the warranty conditions?
15-year guarantee incl. EasyPlates
For which modules can PMT X118 be planned?
Module frame height: 30-40 mm
Module dimensions: 990 - 1230 x 1650 - 2450 mm
Module dimensions: 990 - 1230 x 1650 - 2450 mm